Note: eSID1, eSID2, early eSID0306 and IPC650GW must be sent to Sweden for update. This can be done if you live inside EU. Please Contact us for more information.
All other products (eSID3, eSID9-5 and later versions for eSID0306) may be updated by sending to Sweden or they can updated with Maptuns devices. Read more here
Check Software version
On the eSID1, eSID2, eSID3 and eSID9-5 the version is displayed on first startup. Just disconnect the unit, connect it again and start it up. On eSID03-06 the software version for the two nodes can be shown under the “Diagnostics” group.eSID1 Software
| Software | Released | Description |
|---|---|---|
| Pre Releases | ||
| Initial/Final Release |
eSID2 Software
| Software | Released | Description |
|---|---|---|
| Pre Releases | ||
| Initial Release | ||
|
- Added support for MY2012+MY2014 LHU/NEVS - Bugfix FuelAvg |
||
|
- Improved TurboPressure display (alignment + vacuum in psi) - Bugfix Ethanol display on cars with Ethanolsensor |
||
|
- Improved Torque display (alignment) - Added OilTemp for Automatic Gearbox on MY12 and MY14 - Bugfix DPF Regen distance only showing km |
||
|
- Bugfix ReadDTC from TCM on MY12 and MY14 - Bugfix AutoFogLight |
||
|
- Support for second language. Three variants available: 1) English/German 2) English/French 3) English/Swedish - Bugfix VehSpd > 255 km/h |
||
|
- Activation of Auxiliary Heater from Remote. Long press on Button "-" will activate heater for 30 minutes. - Auto detect of Engine type, to make it easier if you move the unit between cars with different engines. - Auto-detection of other OBD nodes on the bus. If there are other nodes reading data at the same time then eSID2 will synchronize its request between the other requests. It will work if the other nodes send requests every 100ms or slower. |
||
|
- Exterior Light Activation when unlocking the vehicle - Comfort Mirrors. Fold and unfold the mirrors with the remote - New language variant: Spanish/English |
||
|
- Final Release - Improved "Favorites". Now moved to a unique display group and added 2 special CustomViews where the user can specify 3 favorite variables per view to display together. For instance "Coolant Temperature, Lambda and AT Gearbox OilTemp". - Merged Engine and Transmission display groups into "Powertrain" display group. Also moved DPF Status to Powertrain - Now all invalid views are hidden (you wont see XWD display views on a FWD car for instance, or Ethanol on a Diesel engine) - eSID2 now reads all data in the background, even if the display view is not active (max torque, max boost etc) - Torque/TorqueMax/PowerMax views merged to the two "Performance" and "PerformanceMax" views. - eSID2 will automatically switch to DPF Status view when Regeneration starts on the Diesel engine (if eSID is active) - Added Parking Distance view automatically activated when Parking Assistance is engaged (if eSID is active), shows the distance in meters/feet in three sections: Rear Left, Rear Middle and Rear Right. Note! It cannot measure shorter distance than 20 cm (constant beep) - General display handling improvements and increased display update speed. - Added Tire temperature views for cars with TPMS. - Added Requested Airmass value together with Actual Airmass (B207 engine) - Added Lambda/AFR view (B284 engine) - Removed dual language to save memory, so eSID2 now has only one of these five languages: English, Swedish, Spanish, German or French. |
eSID 03-06 Gen1 Software
| Software | Released | Description |
|---|---|---|
GW SC0p5p5 |
Initial Release | |
GW SC0p5p9 |
- Bugfix: Acceleration not showing Miles - Bugfix: Brake Distance not showing Feet - Bugfix: Wrong display could be shown after Welcome Message - Bugfix: Airmass reading on D223L |
|
GW SC0p6p2 |
- Improved Brake distance resolution |
eSID 03-06 Gen2 Software
| Software | Released | Description |
|---|---|---|
GW SE1.0.x |
Initial Release | |
GW SE1.1.x |
- Torque Estimation from Airmass (B207) - Shift up Indication (Configurable RPM limit) - Added Parking Distance view automatically activated when Parking Assistance is engaged (if eSID is active), shows the distance in meters/feet in three sections: Rear Left, Rear Middle and Rear Right. Note! It cannot measure shorter distance than 20 cm (constant beep) |
|
GW SE1.2.x |
- Added Bootloader (support for future updates with MaptunerX) |
|
GW SE1.3.x |
- Added Automatic Hazard functionality on panic brake - Improved eSID handling when updating Icon/Welcome Message - Comfort Mirrors. Fold and unfold the mirrors with the remote - Added configurable UnlockLightTime - Added Wastegate PWM and Ignition Angle to B284 |
|
GW SE1.4.x |
- Actual Gear on Automatic Transmission cars now also shows direction during shifting and lockup in the Status View. - Added Interior Temperature - Added Fuel Pressure view (B284) - Shiftup Icon will only be activated when in ManualMode on AT-vehicles. - Added Text 'CC' when Cruise Control is active. - Added feature to remember the Extra Light Switch state the next driving cycle (No need to press the switch after every startup) - Auto start at 20km/h if any door was opened while vehicle was standstill (not only driver door). - Bugfix: AutoFogLight |
|
GW SE1.5.x |
- Support for IPC650GW (Cruise Control Speed Indication, BioPower Gauge) |
|
GW SE1.6.x |
- Improved Autostart (when Parking Assistance is activated and if seatbelt is attached above 20 km/h) - Added more special views with 4 selectable parameters (increased from 1 to 4 views) - Added more parameters to be selectable in favorite views above (only valid parameters for the actual vehicle will be visible when selecting) - Added control of the auxiliary relay in engine compartment, for instance when Engine Speed > X rpm - Added Cruise Control Speed parameter to Favorites (B207, B284 and Z19DTx) - Added EGR, Swirl, ExhaustTemps, DiffPressure views for Z19DTx + Favorite parameters - Added DPF Force Regen view for Z19DTx - Improved filtering of SIDC Encoder inputs to (help with worn out SIDC Panels). - Added configuration to control eSID from steering wheel (Seek+Nxt or Nxt or Phone button) - Added ICM Audio source detection to be able to only control eSID from steering wheel when AUX is active - Improved Favorite views configuration by moving it all to Settings group like the other eSID (no longer changed with Rheostat) - Change Welcome Message using steering wheel buttons. Easier to change character values and/or shift entire row. - Reworked interface to Aftermarket Stereos. - Added TrqMaxEngSpd and PowMaxEngSpeed, showing which EngineSpeed the maximum Trq/Pwr was registrated. - General bugfixes and improvements - Adjustments to all languages: English, Swedish, French, German and Spanish languages |
eSID 03-06 Gen3 Software
| Software | Released | Description |
|---|---|---|
| Initial Release |
eSID3 Software
| Software | Released | Description |
|---|---|---|
| Initial Release | ||
|
- Added Force DPF Regeneration to Diagnostic Group - Added XWD Percentage to Powertrain Group - Added “Request vs Active Air Limiter” to Air mass (B207) - Added new logic options and new source section to Digital Output Logic/Threshold/Source - Added Extra Light Switch Configuration to Settings Group - Added Digital Input Switch Configuration to Settings Group - Added Engine type to Settings Group - Increased Max Time in Unlock Light Logic/Time - Added Cruise Control Icon to Icons - Added 12H/24H time format to Set System Time - Extended Welcome Message to also display four parameters after the configurable message. - Added XWD% to Custom Parameter Configuration Options list - Misfire (B284) counter max value on B284 increased to 65535. - Added TCS/ESP Off to Vehicle Group |
eSID9-5 Software
| Software | Released | Description |
|---|---|---|
| Initial Release | ||
|
- Added more languages: Swedish, German, French and Spanish - Added Lambda integrator in T7 Fuel Adaptations - Added functionality to set the System Clock when using aftermarket stereo - Added possibility to see the clock in the icon row on MY2006-2010 |
IPC650GW Software
| Software | Released | Description |
|---|---|---|
| Initial Release | ||
| Added support for 1.9L/2.2L Diesel cars |