Compatibility Matrix - Vehicle vs Product

eSID1, eSID2, eSID3

eSID1, eSID2 and eSID3 are the three products that works on Saab 9-3 model year 2007 or newer, i.e. with interior face lift and
where the SID (Saab information Display) is located inside the instrument cluster like the picture below. eSID1 was the first product
developed, but was then replaced by eSID2 and finally both were replaced by eSID3

eSID 03-06

eSID 03-06 works on the new generation Saab 9-3 2003-2006. with the SID located near the windscreen like the picture below.
Two generations exists of the eSID 03-06, and the second generation is much improved and superseeds the first one.

Note! It is not recommended to use eSID 03-06 Generation1 with ICM1 due to not possible change the radio/cd/aux volume with
eSID is active, read more about limitations in the user guide. These problems are resolved with Generation2

eSID 9-5

eSID 9-5 works on the old generation Saab 9-3 1998-2003 and old generation Saab 9-5 1998-2010. All cars are supported but only
Trionic7 and 1.9TiD cars are fully supported. See documentation for more details.

IPC650GW-NG93

This is a gateway product with installation harness to install the Instrument Panel Cluster (IPC) from a NG9-5 (Internal Saab name 650) into the Saab NG9-3 2003-2006